• Zeus 1.9 progress update

    From Neil Williams@39:13/0 to All on Sat Nov 21 21:44:30 2026
    Hi all,

    I haven't updated since September but work has continued, so this is
    a pretty big update list.

    My aim is to get it out of the door this year. My main area of
    concentration has been on the default scriptset, as for new SysOps that's
    their first experience, and for existing SysOps it needs to be something
    that can be mined for new features.

    Once that's clean I'll stop adding features and put my QA hat on.

    A real highlight for me, for everyday usability, is the major improvements to the ANSI watcher - window mode, copy from screen, and performance..

    03/10/26

    o Security - ran a code security tool over Zeus, looking mainly for
    buffer overruns. Reworks to a number of places required to make
    a lot of the code safer and more reliable. This was done after the
    expirience of doing the same over AmyBW and finding many issues. Zeus
    is not so bad as that, but plenty of scope for improvements.
    The modules scanned and modified in this round are:
    zeus.library, TelnetListener, TelnetConnector, ZMailer, ZMP,
    ZPOP3Xfer, ZNewsXfer, ZSMTPXfer, SMTPSpool, EMailGate, ZGate,
    zmf.library 37.26, zeus.library, mbzeus 37.12, mbstarmsg 1.1
    o ZIMAPXfer - NEW. This is an IMAP version of ZPOP3Xfer. Basically the
    same in overall function. You can choose which IMAP folder to pull
    mail from.
    o ZMP 1.9 - NEW: the command line option "ZMP AREAFIX [...]" runs
    AreaFix commands. For example:
    ZMP AreaFix 2:2509/999 "%RESCAN FIDONEWS 100" +AMIGA_GENERAL
    As well as giving easier access to AreaFix unique functions like
    RESCAN, this allows you to programatically change the ZMP.cfg, no
    need to edit by hand, for these functions at least. As a hint,
    you can run any AreaFix command including HELP:
    ZMP AreaFix 2:2509/99 "%HELP"
    o ZMP - Also added LISTNODES and LISTAREAS to report which nodes are
    linked to an echo or tick area:
    ZMP LISTNODES AMIGA#?
    And conversely which areas are linked to a node:
    ZMP LISTAREAS 2:250/2.#?

    05/10/26

    o TelnetConnector, zeus.library, XPRXfer - bug fixes for file transfers
    over Telnet connections. Related to buffer sizes and escaping. These
    were fixed in ZTelser so those fixes were ported back to here.
    The symptom was getting ZModem errors when uploading large files,
    though they would usually complete.
    o ScriptSet-TKG - Messages menu: in an attempt to make the screens
    more message focused, the newest 3 messages of an area are shown
    on screen _in the menu_. This feels a more modern UX, more like
    your typical GUI mail client.
    o ScriptSet-TKG - Files menu: my scriptset was based on Wedlock and used
    hard-coded submenus for each type of file area. That's good in that
    you can theme each area, but bad in that you have to maintain to all
    by hand! So my menus have not changed since the 90s! It also ignores
    Zeus's SIG feature that does the same thing programatically.
    So the TKG scriptset now has a new file menu, which is flat (no
    sub-menus) and copies the Messages menu as far as practical, for a
    consistent UX experience. As part of that, the newest 3 files in the
    current area are listed in the menu, just like the new messages menu.
    o FileEditor 1.9 - files numbered above 65535 could not be opened
    ("Could not load file!") due to the internal use of a 16 bit field
    for the file number. The BBS itself was not affected - Zeus itself
    uses 32bit file numbers - only the GUI File Editor had this issue.
    Fixed.
    Found when my BBS recently added files over that magic number.

    06/10/26

    o ScriptSet-TKG - Messages menu: [H] Help shows a help screen.
    o ScriptSet-TKG - E-Mail menu: the area list now moves with the Up/Down
    arrow keys or 8/2, like every other list menu (it was 9/3), and added
    the cursor-based message viewer (same as V on the Messages menu).
    o rexx.guide - InitMsgScan: the direction keywords are FORWARDS and
    BACKWARDS not FORWARD/BACKWARD!
    o mbzeus.library 37.14 - message areas no longer lose their message
    pointers (showing 0 messages, needing "mbManager RESCAN") after a
    reboot or crash. The messages themselves were always safe, it was
    handling of the pointer statistics.
    o ScriptSet-TKG - Information menu, [7] Weekly Statistics: two new
    pages of echomail charts, drawn from ZMPStat.
    o ScriptSet-TKG - Messages menu: new [U] Summarise (AI). An AI summary
    of up to 5 messages in the current area - the next 5 unread, a
    range such as 10-15, or the last 5.
    o ScriptSet-TKG - File browser ([Y] Your private area on the Files
    menu, DOSscroll.zeus): same keys as the other list menus - the
    Up/Down arrow keys or 8/2 move the cursor, 9/3 page (they were
    8/2 paging and 9/3 moving, and no arrow keys), 7/1 top/bottom.
    Page Up no longer runs past the top of the list. Raw ESC bytes
    converted to ESC='1b'x.

    08/10/26

    o FidoNet time zones (TZUTC) - messages written on the BBS now carry a
    TZUTC control line (FTS-4008) giving the BBS's offset from UTC, so
    readers know which time zone the message date is in. The
    time zone comes from ENV:TZ so it auto updates from tools like FACTS.
    o ZGate - bug fixes in the time zone handling and made it aware of
    ENV:TZ
    o MsgControl / ScriptSet-TKG - a new control code %2024| shows the
    writer's time zone (+hhmm/-hhmm), as interpreted from the TZUTC
    kludge in a Fidonet message. This only works when reading the full
    message - the kludge is not available when scanning headers so you
    get the non-TZ marked dates there. The change to the scriptset
    is in Text/messages/MsgHdr.txt
    There is also %2023| which is based on %2015| - so shows the full
    message date but converts the date from the sender's TZ to BBS time.
    o AIControl - now quits when Zeus quits.
    o EventControl - now quits when Zeus quits.
    o ZLogWatcher - now quits when Zeus quits.
    o Control - now quits when Zeus quits.
    o AIControl - now waits for AI requests in progress to finish before it
    exits, check ZeusAI.log to see pending items during shutdown.
    o zeus - fixed potential crashes in the Quit / Shutdown system.
    o Control - fixed an Enforcer hit in the About window.
    o ZNewsXfer 1.9 - fully reworked for the modern usenet (well, what's
    left, in eternal-september.org!).
    Now has: authentication, TLS, better NNTP compatibility, and support
    for news server that block 'NEWNEWS' by switching to article numbers.
    o ZGate - packets are now written to Inbound as <name>.zgatetmp and only
    renamed to <name>.PKT once complete, and a few other fixes in the same
    area. This ensures partially generated packets are not imported
    before they are finished (a file lock prevented that already, but
    it was not obvious and needed ZMP to do a scan/fail)

    09/10/26

    o DataManager 1.9 - multiple fixes, particularly a new feature to
    renumber data *inside* areas after renumbering the area itself.
    Add "DataManager CHECKAREAS" to fix areas affected by pre-1.9
    renumbering. Several edge case and safety fixes to ensure data
    is not lost during renumbering.
    Added a second progress bar, to report on renumbering of messages/files
    since this will take a lot longer - ensures you can see what it's
    doing. (e.g. "2400 of 5142 messages").
    o Phoenix 0.16 (Bluewave/QWK door) - a stability and safety overhaul.
    o FileControl - control code 1280 (description of a user's access
    template) is now documented, and bug fixed - and the reason it wasn't
    documented is because it didn't work!
    o Phoenix 0.17 - scheduled grabs work - they didn't before. New scheduler
    screen for users to book in a scheduled grab.
    New PhoenixScheduler to run the bookings. You must add an entry to
    CronControl's crontab:
    0 * * * * :NAME "Phoenix grabs" Zeus:Bin/Phoenix/PhoenixScheduler
    Additions to the GUI for controlling aspects of this, also.
    PhoenixCfg's "Reply area" bugfixed and now works, for control messages.
    o PhoenixCfg - The partially incomplete GUI has brought up to the
    standard of the other Zeus prefs tools, features completed, and bugs
    fixed.
    o Startup prefs - a hint along the bottom of the window explains
    that a line starting with ; stays in the list but isn't run.
    o Phoenix packets (Blue Wave, QWK, MBBS) now always include kludges and
    PATH lines, and never SEEN-BY lines; it was previously using the
    area's display settings, which was incorrect as that is intended for
    the BBS's screens only!

    10/10/26

    o ZTextEditor - typing in front of an existing paragraph broke its word
    wrap - now fixed.
    o ZTextEditor - the Line/Col indicator is now off unless the new LINECOL
    argument is given; repainting it after each character was too slow.
    Use it for file descriptions (MAXWIDTH/MAXLINES) only.
    o ZTextEditor - status line messages (e.g. "Press any key to continue")
    now cleared for callers with ANSI compression on.
    o ZTextEditor - much less redrawing while typing, lots of optimisations
    implemented to keep it usable but also fast.
    o Prefs/AI 1.0 - reworked the GUI to the standard of the other prefs tools.

    10/10/26

    o SIGs - Major internal overhaul. SIG configuration is now handled
    centrally, and has full ARexx support. Previously, only the GUI
    SIG editor could edit SIGs. Now, there is a whole new SIG editor
    in the SysOp menu of the TKG ScriptSet!
    o FileControl - this handles the new ARexx commands:
    SetSIG (add/remove areas, create and delete SIGs, description,
    access range, Default flag, SAVE and RELOAD), and GetSIG gains
    ORDINAL, DEFAULT, MSGLIST and FILELIST.
    o zmf.library 37.28 - new functions for editing SIGs (AddSigArea,
    RemSigArea, SetSigInfo, NewSig, DeleteSig, SaveSigs, ReloadSigs,
    LockSigs and friends). The SIG list is protected by a lock while
    it changes. SigEditor, DataManager and UpdateConfigs use these
    instead of implementing it themselves internally
    o SigEditor 1.6 - completely rewritten - it looks and works as before,
    but now all SIG operations happen through zmf.library.
    o FileControl - ADDALLFILES counted every successfully added file as a
    failure (it tested SaveFile() < 1, and success is 0).
    o zmf.library 37.29 - SaveFile() and QuickSave() returned 0 ("saved")
    when FileControl wasn't up or the area didn't exist; they now return
    -1, "no such area", as documented.
    o Quitting Zeus - many bug fixes to prevent potential crashes during exit.
    o ZSMTPXfer 1.9 - reworked for today's mail providers.
    o SMTPSpool 1.9 - bug fixes.

    11/10/26

    o Zeus - the ARexx command UnLoadUser would crash the OS hard. Seen in
    the SysOp menus for editing users.
    o MsgControl - message wrapping fixes for displaying messages in the
    screens.
    o TKG ScriptSet - new "info" (I) key when reading a Fido message to
    analyse SEEN-BY, PATH and Via lines:
    New script is Messages/MsgRoute.zeus.
    An echomail message shows its PATH hop by hop, marking where it crossed
    into another net, and its SEEN-BY lines as a bar for each net (S lists
    every system). A netmail shows its Via lines as a timeline: the time and
    software at each system, each wait drawn as long as it was, the longest
    highlighted, a change of zone marked, and where delays happened. Each
    system is named when traplist.library is working,

    13/10/26

    o Manual - new "Duplicate Ticks Detected" section under ZMP (linked from the
    Tick Processor text): why a TIC is renamed .TIC.bad with "already exists in catalogue" (the Tick area pointing at the wrong file area, or a
    sender whose TIC has no Replaces line), and how to recover the files.
    o ZMP - new BACKUPDIR <directory> keyword in ZMP.cfg - when set, all
    bundles and packets waiting in the inbound are backed up.
    o ZMP - new SHOWCONFIG option - major new feature. This shows the full,
    interpreted configuration of ZMP on screen. It shows how your existing
    zmp.cfg is run, but also shows any configuration options that are
    not set and their defaults. This is useful to show new features that
    you are not using but may want to!

    18/10/26

    o Phoenix PostXfer - the "Total amount of files/bytes sent" lines showed
    the received counts and vice versa (1200/1204 are sent, 1201/1205
    received), so a download reported "sent: 0". ESC codes are now built
    with '1b'x.

    23/10/26

    o TelnetConnector 2.5 / TelnetListener 2.2 - TelnetListener no longer has
    to be started separately. When a TelnetConnector starts, it checks for
    a TelnetListener on its line's port and starts one if needed.
    The listener stops by itself about 10 seconds after the last
    TelnetConnector on its port stops.
    o TelnetListener - each port now has its own log file.

    28/10/26

    o ZMP - four new import checks, off by default,
    MAXMSGAGE <days> sends echomail older than that many days to BAD, and
    MAXMSGFUTURE <days> does the same for echomail dated that far ahead.
    CHKPATHLOOP sends echomail to BAD when this system's address is already
    in its PATH line (the echomail counterpart of the netmail loop check).
    BADBIGMSG sends echomail bigger than MSGBUFFER to BAD; before, it was
    still imported but cut short.
    o ZMP - FIXED: CRCDUPE (dupe-check messages that have no MSGID) hashed the
    packet header instead of the message's own header, so every message
    without a MSGID in a packet got the same check value. It never worked!

    29/10/26

    o zeus.library - the last callers list now records each caller's IP
    address on telnet lines.
    o Zeus - three new control codes: %159| is the caller's IP address on a
    telnet line, %160| is the IP address, or the baud rate on a modem
    line, or "Local", and %9| is the session end time (the current time
    on a live line). 159 and 160 take a line number like the other line
    codes, e.g. %159:7|. Documented in zeus.guide (Appendix G).
    o ANSI watcher 1.8 - the last callers list on the waiting screen can now
    be customised in Zeus:Config/Watchers/LastCallers.cfg:
    "Reload Titles" also now re-reads this file. Use the new control codes
    described above!

    30/10/26

    o ANSI watcher - block copy. While you or a caller is online, drag with the
    left mouse button to mark a block of the screen, then press Right Amiga-C (or menu "Copy") to copy it to the clipboard.
    o ANSI watcher - FIXED: bug with background colours on true-colour
    screenmodes caused black backgrounds on the 'waiting' screen.
    o ANSI watcher - can now run in a window on a public screen.
    Limitation: It needs a screen with 256 or more colours.
    o ARexx - FIXED: GetUserData LASTCALL and FIRSTCALL returned the current
    time and broke the data on disk too.
    o LineEditor 1.9 - adding, deleting or moving a line now says that it takes
    effect when Zeus is restarted. Changing lines on a live running BBS is
    now explicitly not supported and is handled safely. Before, is was
    implicitly not supported, but moving lines live could cause breakage.

    31/10/26

    o Internet - a new home for everything internet. Major changes to
    Prefs/Internet and a new helper tool in Bin/ZInternet
    This new tool syncs up all existing Internet tools in one place
    in an attempt to simplify it all and (partially) modernise it.
    o ZGate 1.9 - mail and news now arrive in the BBS's character set,
    Text sent as base64 is decoded.
    HTML copy is discarded, and any attachments discarded too (unless
    'extract' is enabled)
    o ZGate 1.9 - a gated message's FidoNet MSGID is now made from its
    Message-ID instead of a new random number.
    o ZGate 1.9 - FIXED: with gate type Private, the gate access list was
    never loaded, so only the BBS's own address could use the gate.
    o ZGate 1.9 - simplified gating support: leave Send Mail and Send News
    empty in Internet prefs and ZGate spools each e-mail itself (no
    need for SMTPSpool), ready for for ZSMTPXfer, and each news article to
    Zeus:Internet/Spool/News/.
    o ZNewsXfer 1.11 - now supports posting of articles waiting in a spool
    directory. Replies written in Usenet echoes reach Usenet..!
    o ZInternet 1.0 - runs the whole Internet mail and news
    cycle from one file.
    Using a new Zeus:Config/Internet.cfg file that combines ZGate, News
    POP3 and IMAP settings
    o InterNet prefs 1.6 - now sets up the whole Internet side in one place.

    02/11/26

    o jplistview.gadget 37.7 - the list used by Voyeur, ZMailer, FileEditor,
    FileConfig, MsgConfig, SigEditor and ZLogWatcher brought up to date.
    Keyboard control, major speed enhancements, image support, horizontal
    scrolling, truncate long text in columns (previously overwrote the
    next column), fixes to multi-selection, and more...
    o Voyeur 1.9 - the callers list has a proper heading row (Node#, User
    Name, ...), long names are cut with a '╗'.
    Cursor keys can now be used move through the lines.
    o FileConfig 1.8, MsgConfig 1.4 - the area list has columns with a
    heading (Area, Name, Path / Echo tag); a long name no longer runs
    into the next column. Multi-selecting areas improved.
    o FileEditor 1.10 - multi-select improvements and keyboard controls.
    o SigEditor 1.7 - long tags and names end in a '╗'.
    o ZMailer 1.8 - log and caller windows include jplistview improvements.
    o ZLogWatcher 1.2 - cursor keys, typing a log's name to jump to it
    in the main list, and more improvements.
    o FileConfig 1.9, MsgConfig 1.5, zmf.library 37.31 - DataManager
    ("Update data files") now processes file areas too: renumbering a
    file area moves its catalogue and index entries to the new number,
    and deleting one offers to delete its catalogue. Before, FileConfig
    never told DataManager about changes.
    o jplistview.gadget 37.8 - scroll new rows scroll into view when the bottom
    row is visible - this is implemented for ZLogWatcher.
    o ZLogWatcher 1.3 - a viewer no longer jumps back to the end every time
    its log is written, so a busy log can be scrolled back and read; it
    follows new lines again once scrolled to the bottom. Only the new
    lines are drawn, rather than the whole window each time.
    o ZMailer 1.9 - the log window works the same way: it can be scrolled
    back while calls come in, and only follows new lines while showing
    the last one.

    03/11/26

    o CronControl 1.1 - a crontab line with an option after the command,
    such as "0 5 * * * c:MyJob :NOLOG", is now warned about in cron.log.
    Options only work before the command; one after it is passed to the
    command as part of its text...
    o ZInternet 1.2 - a step that warns or fails now names the log of the
    program it ran: NNTP.log, SMTP.log, ZPOP3Xfer.log, ZIMAPXfer.log,
    ZGate.log or ZMP.log.
    o ZPOP3Xfer 2.2, ZIMAPXfer - both always returned 0, so ZInternet and
    scripts never knew a collection had failed. They now return 10 when a
    server could not be collected from (not reached, login refused, no
    greeting, a message not downloaded or not written) and 20 when they
    cannot run at all.
    o ZPOP3Xfer 2.2 - FIXED: a message that could not be downloaded, or could
    not be written to the mailbox, was still deleted from the server. Only
    mail that is safely on disk is deleted now.
    o ZPOP3Xfer 2.2 - FIXED: a server that closed the connection without a
    greeting made it loop for ever.
    o ZPOP3Xfer 2.2, ZIMAPXfer - FIXED: a server that stopped answering (the
    greeting, a reply, a TLS record) left the program waiting for ever,
    and with it ZInternet and every later run. They now give up after
    TIMEOUT seconds (default 300, at least 10), log "No reply from the
    server", skip that server and return 10. Ctrl-C to exit earlier.

    11/11/26

    o TKG ScriptSet - FIXED: quitting the editor without saving while
    replying to a message still asked "Send message?", and answering
    yes posted the quoted text on its own. A message is now only offered
    for sending if it was saved in the editor; otherwise "Aborted...." is
    shown for a moment and you are returned to the menu.
    o TKG ScriptSet - NEW: major enhancement to the SysOp menu.
    This introduces access levels configured in
    Zeus:Config/SysOp_Menu_Config.rexx.
    Set access levels and/or user names for access to SysOp features.
    This gives better support for Co-SysOps.
    o TKG ScriptSet - FIXED: a wrong password at login used up one of the
    real owner's calls (their total and today's count).
    o TKG ScriptSet - FIXED: Delete in the DOS file lister treated a name
    as a pattern and a directory as a tree, so one key press could remove
    far more than the file shown. It now deletes only the one file.
    (Files/DOSscroll.zeus)
    o TKG ScriptSet - FIXED: a new caller's real name is now checked against
    the ban list and the existing users straight after it is entered,
    not 40 questions later when the account could not be made, and it
    cannot hold a double quote or backslash. (Logon/NewUser.zeus)
    o TKG ScriptSet - FIXED: a password containing a double quote or a
    backslash was stored differently from what was typed, so the caller
    was locked out. Both are now refused when a password is set.
    (Logon/NewUser.zeus, Options/Password.zeus)
    o TKG ScriptSet - FIXED: an upload whose file name held a space or a
    shell character (" ; < > | * ? # ` \) went into shell commands
    unquoted. It is now set aside as .bad for the SysOp. (Files/AddUploads.zeus) o TKG ScriptSet - FIXED: the date of birth questions
    allowed 30 days in
    January, March, May and July (and 31 in April and June), so a birthday
    on the 31st of those months could never be entered. They now use the
    real month lengths and leap years, and accept any year up to this one,
    not just 2013. (Options/DOB.zeus)
    o TKG ScriptSet - FIXED: a caller with no transfer protocol chosen was
    sent back to the menu even after picking one from the list.
    (Files/Download.zeus)
    o TKG ScriptSet - FIXED: uploading several files never stopped asking for
    the next file name when RETURN was pressed. (Files/Upload.zeus)
    o TKG ScriptSet - FIXED: leaving the Feedback menu put the caller in the
    wrong message area; it now saves and restores the message and file
    area and SIG (Main/Feedback)
    o TKG ScriptSet - NEW: Doors/DoorCheck. The door pack is an optional
    install, so every door menu entry now checks whether the door is
    installed.

    15/11/26

    o SysOpReport 1.9 - NEW: a "Log errors and warnings" section counts the
    errors and warnings in the last 24 hours of the main logs.

    16/11/26

    o ZPoint 1.0 - NEW: sets up a FidoNet point in one step.
    Config is Zeus:Config/ZPoint.cfg.
    Run "rx Zeus:Rexx/ZPoint.rexx" and you get a text based menu.
    See "Points: automatic set-up (ZPoint)" in zeus.guide.
    o TKG ScriptSet - the Points menu (Text menu, [P]) lets callers set up
    their own point ([N]), see its details ([S]) and remove it ([X]).
    Full automation for points, if you choose to allow it!

    17/11/26

    o AmiSSL v6 - everything that uses TLS is now built with the AmiSSL v6
    SDK (OpenSSL 4.1)
    o TelnetS (TelnetConnector, ztelser.device) - v6 refuses certificate keys
    under 2048 bits, which would have cut off TelnetS on any board with a
    512 or 1024-bit certificate. The TLS security level is now lowered
    only as far as the key needs, with a warning in the log, and a
    512-bit key limits the line to TLS 1.2. When a certificate or key
    cannot be used, TelnetConnector now logs OpenSSL's reason.
    We want to support small key sizes due to performance on 680x0 CPUs.
    o ZPOP3Xfer, ZIMAPXfer - now send the server's name (SNI) and, with
    VERIFYCERT, check the certificate is for that host. Without SNI,
    servers hosting several names (Gmail among them) sent a placeholder
    certificate, so VERIFYCERT always failed there. A failed check now
    logs why.

    21/11/26

    o ZSetUpFTNNode 1.0 - NEW: for a SysOp who coordinates a net, similar
    to ZPoint, this automates setting up downlinks.
    Config: Zeus:Config/ZSetUpFTNNode.cfg
    Run "rx Zeus:Rexx/ZSetUpFTNNode.rexx" (ADD, REMOVE, INFO, LIST,
    SEGMENT, or a menu). See "Nodes: allocating a node (ZSetUpFTNNode)"
    in zeus.guide.
    o ANSI watcher - scrolls faster with JUMPY. Major improvements on Amiga
    chipset displays.




    --
    Neil Williams
    --- Zeus BBS 1.9
    * Origin: the Killing^Ground BBS . telnet:bbs.zeusdev.co.uk:2323 (39:13/0.0)